Samsung NE595N0PBSR Manuel D'utilisation page 59

REMOVING AND REPLACING THE OVEN DOOR
How to remove the door
CAUTION
1. Open the door completely.
2. Pull the hinge locks down toward the door frame to the unlocked position.
3. Firmly grasp both sides of the door at the top.
4. Close the door to the door removal position, which is approximately 5 degrees from vertical
(Fig. 1).
5. Lift door up and out until the hinge arm is clear of the slot (Fig. 2).
Fig. 1
How to replace the door
1. Firmly grasp both sides of the door at the top.
2. With the door at the same angle as the removal position, slide the indentation of the hinge arm
into the bottom edge of the hinge slot. The notch in the hinge arm must be fully inserted into
the bottom of the slot.
edge of slot
(Better)NE595N0PBSR_AC_DG68-00428A-03_EN.indd 58
• The door is very heavy. Be careful when removing and lifting the door. Do not lift the
door by the handle.
• Turn the power OFF before removing the door.
Hinge lock
Locked position
about 5 °
Bottom Indentation
Unlocked position
Fig. 2
Hinge arm
maintaining your appliance _58
2013-05-23 2:56:22