How to set the oven for self-cleaning
1. Select the length of time for the self-cleaning operation, eg. 3
hours.
Press the SELF CLEAN pad once for a 3 hour clean time, twice
for a 4 hour clean time, or 3 times for a 2 hour clean time.
The default setting is 3 hours.
2. Start the self-cleaning cycle.
Press the START/SET pad. The motor-driven door lock will
engage automatically.
• You will not be able to start a self-cleaning cycle if the control lockout feature is activated
• The oven door locks automatically. The display will show the clean time remaining. It
How to delay the start of self-cleaning
1. Press the SELF CLEAN pad.
Select the desired self-clean time by pressing the SELF CLEAN pad.
2. Press the DELAY START pad.
3. Using the CLOCK AM/PM and number pads, enter the time you want the clean cycle to start
4. Press the START/SET pad.
The display will show Delay, Self clean, and the Lock icon. The motor-driven door lock will
engage automatically.
5. The Self-Cleaning cycle will turn on automatically at the set time.
How to turn off the self-cleaning feature
You may find it necessary to stop or interrupt a self-cleaning cycle due to smoke in the oven.
(When the self-cleaning cycle is done, End will show in the display and a beep will sound 6 times.
1. Press the CLEAR/OFF pad.
2. You will be able to open the oven door once the oven has cooled down for approximately 1
hour.
After a self-cleaning cycle
• You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools.
(If white spots remain, remove them with a soap-filled steel wool pad and rinse thoroughly with
a vinegar and water mixture.)
• If the oven is not clean after one cycle, repeat the cycle.
• You cannot set the oven for cooking until the oven is cool enough for the door to unlock.
(Better)NE595N0PBSR_AC_DG68-00428A-03_EN.indd 52
or if the oven's temperature is too hot.
is not be possible to open the oven door until the temperature drops to a safe/cool
temperature.
maintaining your appliance _52
2013-05-23
2:56:20