Velleman CAMTVI9 Mode D'emploi page 4

4. Features

weatherproof

with B/W night vision (IR LEDs)

1080P video signal

vandal-proof bracket
5. Overview
Refer to the illustrations on page 2 of this manual.
1 IR LEDs
2 lens
3 light sensor
6. Hardware installation
1. Slightly loosen the hex screw on the bracket.
2. Choose your mounting spot. Take the base as a template and drill the
necessary mounting holes. If necessary, drill a hole for routing the
cables. Insert a nylon plug in each hole.
3. Pass the camera cable through the base and fix the bracket using the
included screws. If applicable, pass the cable through the routing hole.
4. Slightly loosen the hex screw, adjust the camera lens and aim it
toward the surveillance area.
V. 02 – 10/02/2016
CAMTVI9
4
5
4
sunshield
bracket
©Velleman nv