Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
If you encounter problems with this unit, check the following before requesting service.
1 Refer to "Trouble" below.
2 Refer to the "Troubleshooting" section in the "Detailed User Guide".
If you have difficulties operating the unit, refer to the detailed descriptions in the "Detailed
User Guide".
http://manual.jvc.co.jp/index.html/
0
3 Refer to the FAQ of new products on JVC's website.
http://www.jvc.com/
0
4 This unit is a microcomputer-controlled device. Electrostatic discharge, external noise
and interference (from a TV, a radio, etc.) might prevent it from functioning properly.
In such a case, reset the unit.
A Turn off the power. (Close the LCD monitor.)
B Remove the AC adapter and battery pack from this unit, reattach them, open
the LCD monitor and this unit powers on automatically.
5 If the above do not solve the problem, consult your nearest JVC dealer or JVC
service center.
Trouble
Trouble
POWER/CHARGE lamp
starts blinking when the
monitor is closed.
Recording cannot be
performed.
Recording stops
automatically.
Sound or video is
interrupted.
3D images cannot be
seen on a 3D
compatible TV properly.
For more information, refer to the Detailed User Guide
30
http://manual.jvc.co.jp/index.html/
Action
The battery pack is being charged.
0
Check the A / B button.
0
Set to the recording mode by tapping
0
the q button.
Turn off this unit, wait for a while, and
0
turn it on again. (This unit stops
automatically to protect the circuit when
the temperature rises.)
Recording stops automatically after 12
0
hours of continuous recording.
Sometimes playback is interrupted at
0
the connecting section between two
scenes. This is not a malfunction.
Set "HDMI OUTPUT" in the "COMMON"
0
menu accordingly.
Page
10
15
18
-
-
-
-
Publicité
