Publicité
Les langues disponibles
Les langues disponibles
6 electrolux
"Start/Pause"
pushbutton by pressing
the "Delay start"
pushbutton again
(when all indicators are off, the wash pro-
gramme will start immediately).
If you have already pressed the "Start/
Pause"
pushbutton and you want to
change or cancel the delayed start, pro-
ceed as follows :
• To cancel the delay start and start the cy-
cle immediately, press "Start/Pause"
and then "Delay start"
Pause"
to start the cycle.
• To change the timer delay period, you
must go through the "Stop" position
and reprogramme your cycle.
The lid will be locked during the delayed
start time. If you need to open it, you must
first pause the appliance by pressing the
"Start/Pause"
pushbutton. After closing
the lid again, press the "Start/Pause"
pushbutton.
Start of the programme
Press the "Start/Pause"
start the cycle. The corresponding light will
come on green.
It is normal for the programme selector to
remain stationary during the cycle. The light
corresponding to the current cycle is illumi-
nated.
+
: Prewash + Wash
+
: Rinses + Spin
: End of cycle
Stand by: once the programme has
finished after a few minutes the energy
saving system is enabled with the pilot
WASHING PROGRAMMES
Programme / Type of washing
Cottons (cold - 90°) : White or colour,
e.g. normally soiled work clothes, bed linen,
table linen, body linen, towels.
Max. spin speed: 1000/900 rpm
Synthetics (cold - 60°) : Synthetic fab-
rics, body linen, coloured fabrics, non-iron
shirts, blouses.
Max. spin speed: 900 rpm
Delicates (cold - 40°) : For all delicate
materials, for example curtains.
Max. spin speed: 700 rpm
All manuals and user guides at all-guides.com
. Press "Start/
pushbutton to
Load
5,5 kg
1)
2,5 kg
2,5 kg
Interrupting a programme
Adding washing during the first 10 mi-
nutes
Press the "Start/Pause"
the corresponding light will flash green while
the appliance is paused. The lid can only be
opened around 2 minutes after the washing
machine has come to a stop. Press the
"Start/Pause"
pushbutton again to con-
tinue the programme.
Modifying the programme in progress
Before making any changes to the current
programme, you need to pause the wash-
ing machine by pressing the "Start/Pause"
pushbutton. If the modification is not
possible, the "Start/Pause"
flashes red for a few seconds. If you still de-
cide to change the programme, you must
cancel the current programme (see below).
Cancelling the programme
If you want to cancel the programme, turn
the programme selector to the "Stop" posi-
tion
.
End of the programme
The washing machine stops automatically,
the "Start/Pause"
and the light "End of cycle"
The lid can only be opened around 2 mi-
nutes after the washing machine has come
to a stop. Turn the programme selector to
the "Stop" position
Unplug and close water inlet tap.
lights switched on. By pressing any
button the appliance will come out of
the energy saving status.
Possible options
Rinse hold, Night cycle, Prewash,
Daily, Super quick, Extra rinse, Delay
start
Rinse hold, Night cycle, Prewash,
Daily, Super quick, Extra rinse, Delay
start
Rinse hold, Night cycle, Prewash,
Daily, Super quick, Extra rinse, Delay
start
pushbutton :
pushbutton
pushbutton goes out
comes on.
. Remove washing.
Publicité
