Sony CDX-CA400 Mode D'emploi page 19

Radio recept ion
Preset tuning is not possible.
•Store the correct frequency in the memory.
•The broadcast signal is too weak.
The stations cannot be received.
The sound is hampered by noises.
•Connect a power antenna control lead
(blue) or accessory power supply lead
(red) to the power supply lead of a car's
antenna booster. (Only when your car has
built-in FM/AM antenna in the rear/side
glass.)
•Check the connection of the car antenna.
•The auto antenna will not go up.
t Check the connection of the power
antenna control lead.
•Check the frequency.
Automatic tuning is not possible.
•The local seek mode is set to "ON."
t Set the local seek mode to "OFF"
(page 12).
•The broadcast signal is too weak.
t Perform manual tuning.
The " ST " indication flashes.
•Tune in the frequency accurately.
•The broadcast signal is too weak.
t Set to the monaural reception mode
(page 12).
A program broadcast in stereo is heard in
monaural.
The unit is in monaural reception mode.
t Cancel monaural reception mode
(page 12).
Downloaded from: https://www.usersmanualguide.com/
Error displays
(For this unit and optional CD/M D changers)
The following indications will flash for a
while.
Err01
The disc magazine is not inserted in the CD/
MD unit.
t Insert the magazine in the CD/MD unit.
Err02
No disc is inserted in the CD/MD unit.
t Insert discs in the CD/MD unit.
Err03
A CD/MD cannot play because of some
problem.
t Insert another CD/MD.
Err04
A CD is dirty or inserted upside down.
t Clean or insert the CD correctly.
Err05
No tracks have been recorded on an MD.
t Play an MD with recorded tracks on it.
Err99
The CD/MD unit cannot be operated
because of some problem.
t Press the RESET button on the unit.
If these solutions do not help improve the
situation, consult your nearest Sony dealer.
19