Publicité
Les langues disponibles
Les langues disponibles
4. CHOOSE THE OPENING
F
OR VERTICAL DISCHARGE OR NON
From outside the unit, remove the knockout in order to clear vertical discharge opening
(see illustration beside).
F
OR HORIZONTAL DISCHARGE
From outside the unit, remove the knockout from back of hood (see illustration beside).
5. BLOWER REMOVAL (HORIZONTAL DISCHARGE ONLY)
The WC53I Series range hoods are factory shipped with the blower mounted for a vertical discharge configuration. For a horizontal discharge
configuration, disassemble the blower from the inner top of the hood (see procedure below). It will be assembled to the inner back of the hood
once the hood is mounted on the wall.
1) Unplug the blower.
HD0817
-
:
DUCTED INSTALLATION
:
2) Using a 5/16" socket, or a Robertson or a Phillips no. 2 screwdriver, remove the 4 blower mounting
screws (2 on each side) from the inner top of the hood (see pictures below). Set the blower and screws
aside.
HD0385
L
EFT SIDE MOUNTING
SCREW LOCATIONS
5
HR0122
HR0123
R
IGHT SIDE MOUNTING
SCREW LOCATIONS
HD0386
Publicité
