Samsung SR8855 Manuel D'utilisation page 19

Assembling the cleaner
NAME OF EACH PART
[ Status display Window ]
dISPLAY PART
1. Number display
- Shows the timer display, progress status, and error codes using numbers, letters and graphics.
2. Battery Level Indicator
- Charging : Shows the charging progress in 3 steps.
- In Use : Shows the battery charge level. The battery charge level is reduced by each level from FULL
3. Scheduled Cleaning
- When cleaning is scheduled, the Scheduled Cleaning icon is lit.
4. daily
- When daily cleaning is scheduled, the Daily icon is lit.
5. Recharging
- This icon turns on when the cleaning robot returns to the charger station to charge its battery.
6. Cleaning Mode display
- Each time the Cleaning Mode button is pressed, the corresponding cleaning mode is displayed.
(a) Auto Mode : This icon turns on when Auto cleaning mode is selected.
(b) Spot Mode : This icon turns on when Spot cleaning mode is selected.
(c) Max Mode : This icon turns on when Max cleaning mode is selected.
(d) Manual Mode : This icon turns on when Manual cleaning mode is selected.
(e) Edge Mode : "
BUTTON PART
7. Start/Stop
- Press to start/stop cleaning.
8. Cleaning Mode
- Press to select a cleaning mode. After selecting a cleaning mode, press the (
9. Timer/daily
- Press to set a scheduled or daily cleaning.
10. Recharging
- When this button is pressed, the Recharging icon is turned on and the cleaning robot will return to the
charger station to charge its battery.
DJ68-00518F.indb19
All manuals and user guides at all-guides.com
1
6
while operating. (When the battery is fully discharged, one level will flash to display "LO".)
" is on when Edge cleaning mode is selected.
ⓐ ⓑ ⓒ ⓓ
8 9 10
7
4
3
2
5
) button to start cleaning.
Assembling the cleaner _19
2010.2.231:21:49PM