Télécharger Imprimer la page

AYA AFD2102A+X AQUA Instructions D'utilisation page 40

Masquer les pouces Voir aussi pour AFD2102A+X AQUA:

Publicité

Les langues disponibles

Les langues disponibles

Wipe the inside and the outside of the refrigerator
with a wet soft cloth.
If it's too dirty, clean with a soft cloth with neutral
detergent and, then remove the moisture with dry
cloth.
If you leave the refrigerator idle for a long time,
proceed as follows:
Disconnect the refrigerator from the electric power
supply.
Remove all food.
Clean and dry the inside as instructed in the
direction given above for cleaning.
Leave the doors open to prevent any unpleasant
smells while the refrigerator is not used.
Cleaning
When cleaning the refrigerator the electric plug
must be removed from the power supply.
Use water or a non-abrasive detergent on a soft
cloth and remove the moisture with a dry soft
cloth. Remember to clear the defrost drain at the
back just above the glass cover.
Replacing the light bulb
If the internal light does not work anymore,
disconnect then reconnect at once the device. If the
light does not still work, verify if the light bulb is
correctly screwed. If in spite of these tests, there is
no light, it is necessary to change the light bulb. Use
a 220-240V~, MAX 10W light bulb.
Disconnect the appliance;
-38-

Publicité

loading