Publicité
Les langues disponibles
Les langues disponibles
Setting the Dynamic
Soundstage Organizer (DSO)
If your speakers are installed into the lower part
of the doors, the sound will come from below
and may not be clear.
The DSO (Dynamic Soundstage Organizer)
function creates a more ambient sound as if there
were speakers above the dashboard (virtual
speakers).
You can store the DSO setting for each source.
DSO mode and image of virtual speakers
*3
*2
*1
*4
*1 DSO-1
*2 DSO-2
*3 DSO-3
*4 DSO-OFF
1
Press (SOURCE) to select a source.
2
Press (DSO) repeatedly until the
desired DSO setting appears.
Each time you press (DSO), the DSO setting
changes.
To cancel the DSO function, select "DSO-
OFF." After 3 seconds, the display returns to
normal play mode.
Notes
• Depending on the type of car interior or type of
music, DSO may not have a desirable affect.
• If FM broadcasts are difficult to hear, set DSO to
OFF.
20
*3
*2
*1
*4
Adjusting the front and rear
volume
1
Press (SOURCE) to select a desired
source.
2
Press (SOUND) repeatedly until "FAD"
appears.
3
Press the volume +/– button
repeatedly to adjust the volume of
front/rear speakers.
When adjusting with the card remote
commander, press (SOUND), then press
(SEEK) (+) or (SEEK) (–).
After 3 seconds, the display returns to normal
play mode.
Adjusting the cut-off frequency for the
front/rear speakers
To match the characteristics of the installed
speaker system, you can select the cut-off
frequency of the speakers.
Cut-off frequency
off
80
Frequency (Hz)
(With the card remote commander)
1
During playback or radio reception,
press (MENU).
2
Press (DISC) (+) or (DISC) (–)
repeatedly until "HPF" appears.
3
Press (SEEK) (+) or (SEEK) (–) to
select the cut-off frequency.
Each time you press (SEEK) (+) or (SEEK)
(–), the frequency changes as follows:
OFF (default setting) y 80 Hz y 120 Hz
120
Publicité
