Publicité
Les langues disponibles
Les langues disponibles
Storing only the desired
stations
You can manually preset the desired stations on
any chosen number button.
(With the card remote commander)
1
Press (SOURCE) repeatedly to select
the radio.
2
Press (MODE) repeatedly to select the
band.
3
Press (SEEK) (+) or (SEEK) (–) to tune
in the station that you want to store.
4
Press the desired number button ((1)
to (6)) for 2 seconds until "MEM"
appears.
The number button indication appears in the
display.
Note
If you try to store another station on the same number
button, the previously stored station will be erased.
14
Storing station names
— Station Memo
You can assign a name to each radio station and
store it in memory. The name of the station
currently tuned in appears in the display. You can
assign a name using up to 8 characters for a
station.
Storing the station names
(With the card remote commander)
1
Tune in a station whose name you
want to store.
2
Press (MENU), then press (DISC) (+)
or (DISC) (–) repeatedly until
"NAMEEDIT" appears.
3
Press (ENTER).
4
Enter the characters.
1 Press (DISC) (+)*
select the desired character.
A
B
C
...
t
t
t
–
t
t
*
...
t
*1 For reverse order, press (DISC) (–).
*2 (blank space)
2 Press (SEEK) (+) after locating the
desired character.
If you press (SEEK) (–), you can move back
to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
5
Press (ENTER).
repeatedly to
1
0
1
2
+
...
t
t
t
A
*
t
2
Publicité
