SOLIS Prestige Mode D'emploi page 18

BDA_Solis_Wasserkoche#478E3.qxd 9.1.2006 12:01 Uhr Seite 16
Know your SOLIS Prestige Kettle
Removable scale filter
Filters out scale deposits for
cleaner water and prolongs
element life
Premium quality
brushed
stainless steel
1.6 litre capacity
Fast boil 2200 watt
concealed element
Multi directional power
base with cord storage
16
All manuals and user guides at all-guides.com
Easy to open lid
Viewing window in top of kettle
Soft grip handle
Illuminated
water gauge
Illuminated power
'on' light
On/Off switch
Safety auto
cut out and
boil dry protection
Operating your SOLIS Prestige Kettle
Before first use
Remove any promotional materials and packaging
materials before use. It is recommended that before
the first use the kettle is filled to the maximum level,
boiled and water discarded. Your kettle will only
operate when positioned on the power base with the
On/Off switch in the On position. The kettle will
automatically switch off once the water has boiled.
Operation of your kettle
1. To fill the kettle, remove it from the power base
and open the lid by pressing the lid release button.
Fill with the desired amount of water. Always fill
the kettle between the minimum and maximum
marks on the water window. Too little water will
result in the kettle switching off before the water
has boiled.
2. Ensure that the lid is locked firmly into place.
Place the kettle firmly onto the power base. Plug
the power cord into 230V power point.
3. Press the On/Off switch to the 'On' position.
The power 'On' light and the water guage will
illuminate.
Note
Always fill the kettle between the minimum
(Min) and the maximum (Max) marks on the
exterior of the kettle. Too little water will result
in the kettle switching 'Off' before the water
has boiled. Filling above the maximum mark on
the exterior of the kettle may result in boiling
water splashing from the kettle.
THIS APPLIANCE IS DESIGNED FOR THE BOILING OF DRINKING QUALITY WATER ONLY, NEVER USE IT
TO HEAT OR BOIL ANY OTHER LIQUIDS OR FOODSTUFFS. THE LID SHOULD ALWAYS BE FIRMLY IN
PLACE AND LOCKED CLOSED BEFORE USE.
Note
This kettle must only be used with the power
base supplied. Use caution when pouring water
from your kettle, as boiling water will scald. Do
not pour the water too quickly.
The kettle will automatically switch 'Off' once the
water has boiled. Lift the kettle from the power base
and pour the water. Take care to hold the kettle level,
especially when filled to the maximum level. To
re-boil it may be necessary to wait for a few seconds
to allow the control to reset.
The kettle may be stored on its power base when not
in use. Unplugged the appliance from the power
when not in use.
Safety boil dry protection
The kettle is fitted with a safety device, which
protects against overheating should the appliance be
operated with insufficient water. If this occurs the
kettle will stop heating. Switch 'Off' at the power
point and allow kettle to cool before refilling. The
safety device will automatically reset when the kettle
has cooled down.
For additional safety your kettle is fitted with an
additional thermal cut out. In the event of
overheating, the kettle will automatically shut down
to prevent further damage. Should this occur, take
your kettle to an authorised SOLIS Service Centre.
17