emerio SICM-106048.1 Mode D'emploi page 7

Hints
We suggest that you keep the inner bowl in the freezer so that it is ready for use. Place in a plastic bag

before freezing. Freeze the inner bowl in the upright position.
Always make sure the inner bowl is thoroughly dry before placing in the freezer.

Do not puncture or heat the inner bowl.

The inner bowl should be placed in a freezer that is operating at a temperature of -18° Centigrade

(-0.40° Fahrenheit) or below for 8 hours before use.
For best results always refrigerate the ingredients before making ice cream.

The addition of alcohol to recipes inhibits the freezing process.

CLEANING
Always switch off, unplug and dismantle before cleaning.

Never put the power unit in water or let the cord or plug get wet.

Do not wash parts in the dishwasher.

Do not clean with scouring powders, steel wool pads, or other abrasive materials.

Power unit
Take out the power unit from the lid.

Wipe with a damp cloth then dry.

Lid
Wash the lid then dry thoroughly.

Paddle
Take out the paddle from the inner bowl.

Hold up the upper fitting and turn the lower fitting anticlockwise then dismantle the lower fitting from

the paddle.
Wash then dry thoroughly.

Fit the upper fitting and the lower fitting into the paddle again.

Lower fitting
Tight
Inner Bowl
Allow the inner bowl to reach room temperature before attempting to clean.

Take out the inner bowl and wash the inside of the bowl, then dry thoroughly.

All manuals and user guides at all-guides.com
Upper fitting
Loose