Publicité
Les langues disponibles
Les langues disponibles
INStallatIoN
positioning
Position the appliance away from heat sources such as stoves, radiators, direct sunlight etc.
Before connect the power supply, remove the supporting base and then screw down the front foot of appliance correctly to make it leveled correctly.
This appliance is suitable in 'T' climate.
Climate Class
T
Appliances must not be exposed to rain. Sufficient air must be allowed to circulate in the lower rear section of appliances, as poor air circulation can affect
performance. Built-in appliances should be positioned away from heat sources such as heaters and radiators and out of direct sunlight. Behind the appliance
there should be a free space of at least 3in. Kitchen units (e.g. cupboards) should be at least 2in. away from the appliance in order to assure adequate
ventilation. There should be 4in. between both sides of the appliance and other obstacles.
electrical connection
Before connecting the appliance to the power supply, ensure that the voltage and frequency as indicated on the data plate correspond to those of the electrical
mains.
A deviation of -6% to +6% is admissible with respect to the rated voltage. For operation with other voltage supplies, an adequately powered auto-transformer
is required.
Always connect the appliance to an efficient earthing system.
Put the appliance in upright position for at least 2 hours before switching it on.
All manuals and user guides at all-guides.com
Ambient Temperature
From +16˚C to +43˚C
6
Publicité
