GE 25880 Mode D'emploi page 31

1. Use the caller ID (rev or skip) button (on base) or caller ID/vol (- or +)
button (on cordless handset) to scroll to the desired record.
2. Press the memory/conference button on base or handset.
3. Press the desired memory location. Example, press the number 1 key to
store the record in memory location 1. You will hear a confirmation tone.
If the memory location is occupied and, you want to replace it, you must
confirm the replacement by pressing the memory/conference button on
base or handset. REPLACE MEMO? shows in the display.
Dialing a Caller ID Number
When reviewing any call record in the Caller ID memory, you can dial back
the caller's number.
1. Make sure the phone is OFF (not in talk mode).
2. Press caller ID (rev or skip) button (on base) or caller ID/vol (- or +) button
(on cordless handset) until the desired call record is displayed.
Depending on (a) how the incoming caller's phone number is formatted
when received, and (b) whether or not you pre-programmed your local
area code into memory, you may need to adjust the format of the caller's
phone number before dialing it back.
The format button lets you change the format of the displayed number.
Available formats include:
Number of digits
Eleven digits
Ten digits
Seven digits
NOTE: If the phone company does not supply all ten digits of an incoming
caller's number, you will not be allowed to adjust the format of that number.
All manuals and user guides at all-guides.com
Explanation
long distance code "1"
+ 3-digit area code
+ 7-digit telephone number.
3-digit area code +
7-digit telephone number.
7-digit telephone number.
Example
1-317-888-8888
317-888-8888
888-8888
31