GE 25880 Mode D'emploi page 16

3. Press program/flash on the base to confirm handset is linked to the base.
WAITING HANDSET REGISTRATION shows in the display.
4. Press the flash/prog button on the handset until LINK BASE? shows in the
display. NO is the default setting.
5. Press caller ID/vol (- or +) button on the handset to scroll to YES.
6. Press flash/prog on the handset again to confirm.You will hear a long
confirmation tone when the handset is successfully linked to the base.
Default Setting
NOTE: This setting may be made with the base or the cordless handset.
1. Press the program/flash button on base or flash/prog button on handset
until DEFAULT SETTING or DEFAULT shows in the display. NO is the
default setting.
2. Use the touch-tone pad to select 1YES or 2NO, or press the caller ID (rev
or skip) button on the base or caller ID/vol (- or +) button on the handset
to scroll toYES or NO.
NOTE: If you choose YES all settings in the programmable menu return to
factory defaults except day and time.
3. Press the program/flash button on base or flash/prog button on handset
again to store your selection.
Basic Operation
Answering a Call
Check the display to see who is calling.
NOTE: You can only use one handset at a time. UNAVAILABLE will be
displayed if other handset is in use.
Cordless Handset
1. Press the talk/end/call back button on the handset.
2. When finished, press talk/end/call back or place the handset in charging
cradle to hang u.
16
All manuals and user guides at all-guides.com