GE 25880 Mode D'emploi page 23

2. Dial the number (using a memory dial number, if desired.)The number
shows in the display.
-Or-
Dial the number and then press the speaker/call back button.
3. When the party answers, adjust speakerphone volume by pressing the
speaker volume + and - buttons.
4. To end the call, press the speaker/call back button again.
Switching Between Speakerphone and Handset
You can switch between speakerphone and handset after dialing a number,
or any time during a conversation.
Speaker to Corded/Cordless Handset — Press talk/end/call back on handset,
and then press speaker/call back on the base. Or lift the corded handset when
using speaker phone. Speak into the cordless/corded handset.
Corded/Cordless Handset to Speaker — Press speaker/call back, then hang
up the handset. Speak into the Speakerphone.
Intercom Operation
A two-way intercom is possible between the base and cordless handset
without tying up the telephone line and since the telephone line is not used,
you can still receive incoming calls.
NOTE: There is no conference and intercom features between handsets.
Making an Intercom Call
1. Make sure the phone is OFF (not inTALK mode).
2. Press the page/intercom button on base or int/transfer button on cordless
handset. A paging tone sounds at the base and cordless handset.
3. When finished, press the page/intercom button on base or int/transfer
button on cordless handset.
NOTE: To cancel the intercom call, press page/intercom on base or int/
transfer button on cordless handset.
All manuals and user guides at all-guides.com
23