Télécharger Imprimer la page

Roadstar HIF-1799TUMP Manuel D'instructions page 6

Publicité

Les langues disponibles

Les langues disponibles

MP3 TRACK FORMAT REQUIREMENT:
-
MP3 bit rate : 32 kbps~256 kbps and wma bit rate : 32 kbps ~ 320 kbps
-
The performance of playing MP3 disc is various from the quality of recording disc and
the method of recording. Furthermore, the searching lead-time for MP3-CD is longer
than normal cd due to difference format.
REPEAT/RANDOM MODE
Press the REPEAT button from Remote Contrrol or PLAY MODE from main unit to activate
this function. All the tracks can be played in difference mode as follow:
FOR CD
(1) REPEAT 1
(2) REPEAT ALL TRACK
I
FOR MP3/WMA DISC
(1) REPEAT 1
(2) REPEAT 1 FOLDER
(5) RANDOM
Repeat play
You can listen the desired tracks or folder repeatedly by this function.
Random play
You can listen all the tracks or folder in a random order by this function
CD DISC PROGRAMMING
Up to 99 tacks can be programmed for MP3 (20 in CD) and play in any order. before use,
be sure the system is at stop mode before programming:
1.
Press CD/USB mode & stop the cd playback.
2.
Press the "PLAY MODE" button, " P " will appear on LCD display (18). Moreover, it will
indicate program no. and digits for track no. to be programmed.
3.
Select a desired track by pressing SKIP
4.
Press the " PLAY MODE " button to store the trace into memory.
5.
Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.
When all the desired tracks have been programmed, press cd " PLAY/PAUSE (2) to
6.
play the disc in assigned order.
7.
To cancel the programmed file, press "STOP" button
All manuals and user guides at all-guides.com
English
7
(4) RANDOM
OFF MODE
(3) REPEAT ALBUM
or
buttons (3).
English
856
PLAYBACK OF MP3 SONG VIA USB STORAGE MEDIA
The system is able to decode and playback all MP3 file which stored in the memory media
with USB connecting port
1.
Set function selector (15) at CD/USB mode and then press FUNCTION button (6) to
select " USB.
2.
Plug-in the USB plug with the face up & make sure it going into completely.
Connecting the USB upside down or backwards could damage the audio system or
the storage media (usb thumb drive). Check to be sure the direction is correct before
connection.
3.
The system will start reading the storage media automatically after connecting, and
LCD display (18) will show the total number of MP3 files.
4.
Repeat the same playback procedure as playing CD MP3 disc as above.
REMARK
-
The system can detect and read the file under mp3 format only though the usb port.
-
If connect the system to MP3 player via the usb socket, due to variances in MP3
encoding format, some mp3 player may not be able to play via the usb socket. this
is not a maul-function of the system.

Publicité

loading