Publicité
Les langues disponibles
Les langues disponibles
equipment can turn over total volume of pool water no less than once
every 12 hr. You can check the water capacity on packaging to select
suitable circulation system. Pump provided for the circulation of water
shall be tested by a Nationally Recognized Testing Laboratory and
certified to conform to UL1081.
Also make sure the selected suction outlet sold with the pump should
be tested by a Nationally Recognized Testing Laboratory and certified
to conform to ASME/ANSI A112.19.8 or its successor standard ANSI/
APSP-16, in order to prevent suction entrapment.
Please read carefully and keep for future
reference
CHOOSE THE CORRECT
LOCATION
The surface chosen to install the pool must respect the following
technical characteristics:
1. Because of the combined weight of the water inside the pool and
the pool users, it is extremely important that the surface chosen to
install the pool is capable of uniformly supporting the total weight
for the entire time the pool is installed. When choosing the
surface, take into consideration that water may come out of the
pool when in use or in the rain. If the water softens the surface, it
may lose its capability to support the pool weight.
2. Check regularly the position of the vertical legs and the
U-supports. They must be on the same level as the bottom of the
pool at all times. If the vertical leg or the U-support starts to sink
into the ground, drain the water immediately to avoid the pool
collapsing due to the uneven loading on the frame structure.
Change the location of the pool or modify the surface material.
3. We recommend positioning the pool away from any objects
children could use to climb into the pool.
4. Position the pool near an adequate drainage system to deal with
overflow or to discharge the pool.
5. The surface must be flat and smooth. If the surface is inclined or
uneven, it can create an unbalanced loading on the structure of
the pool. This situation can damage the welding point of the liner
and bend the frame. In the worst cases, the pool can collapse,
causing serious personal injury and/or damage to personal
property.
6. The selected surface must be clear of any type of object. Due to
the weight of the water, any object under the pool could damage
or perforate the bottom of the pool.
7. The selected surface must be clear of aggressive plants and weed
species. Those types of strong vegetation could grow through the
liner and create water leakage. The grass or other vegetation that
may cause odor or slime to develop have to be eliminated from
the set-up location.
8. The selected location must not have overhead power lines or
trees. Be sure the location does not contain underground utility
pipes, lines or cables of any kind.
9. The selected position must be far from house entrance. Do not
position any equipment or other furniture around the pool. The
water that comes out of the pool during the use or due to a faulty
product can damage the furniture inside the house or surrounding
the pool.
10. The selected surface must be flat and without holes that can
damage the material of the liner.
Follow the important instructions above to choose the correct surface
and location to set up your pool. Damaged parts of the pool, due to
the fact that the set-up surface and location does not match the
instructions, will not be considered as manufacture defect and will
avoid the warranty and any service claims.
Suggested set-up surfaces: grass, ground, concrete, and all other
surfaces that respect the above set-up conditions.
Not suggested surfaces: mud, sand, gravel, deck, balcony,
driveway, platform, soft/loose soil or other surface that does not meet
the above set-up conditions.
NOTE:
Check with your local city council for by-laws relating to
fencing, barriers, lighting and safety requirements and ensure you
comply with all laws.
NOTE:
If have a filter pump, refer to the pump's manual for
instructions.
NOTE:
The ladder must match the pool size and should be
used only for entering and exiting the pool. It is forbidden to exceed
the permitted payload of the ladder. Check regularly if the ladder is
properly assembled.
COMPONENTS LIST
NOTE:
Some parts already have been installed on the pool.
STEEL PRO™
A
SIZE
9 ft. x 26 in.
256002001312
(2.74 m x 66 cm)
10 ft. x 26 in.
256002001254
(3.05 m x 66 cm)
10 ft. x 30 in.
256002001257
(3.05 m x 76 cm)
12 ft. x 30 in.
256002001261
(3.66 m x 76 cm)
13 ft. x 33 in.
256002001425
(3.96 m x 84 cm)
B
SIZE
9 ft. x 26 in.
256002001312
(2.74 m x 66 cm)
10 ft. x 26 in.
256002001254
(3.05 m x 66 cm)
10 ft. x 30 in.
256002001257
(3.05 m x 76 cm)
12 ft. x 30 in.
256002001261
(3.66 m x 76 cm)
13 ft. x 33 in.
256002001425
(3.96 m x 84 cm)
C
SIZE
9 ft. x 26 in.
256002001312
(2.74 m x 66 cm)
10 ft. x 26 in.
256002001254
(3.05 m x 66 cm)
10 ft. x 30 in.
256002001257
(3.05 m x 76 cm)
12 ft. x 30 in.
256002001261
(3.66 m x 76 cm)
13 ft. x 33 in.
256002001425
(3.96 m x 84 cm)
D
SIZE
9 ft. x 26 in.
256002001312
(2.74 m x 66 cm)
10 ft. x 26 in.
256002001254
(3.05 m x 66 cm)
10 ft. x 30 in.
256002001257
(3.05 m x 76 cm)
12 ft. x 30 in.
256002001261
(3.66 m x 76 cm)
13 ft. x 33 in.
256002001425
(3.96 m x 84 cm)
6
Top Rail
ITEM
PART CODE
P06211
P06211
P06211
P06211
P06211
Vertical Pool Leg
ITEM
PART CODE
P06212
P06212
P06213
P06213
P06214
T-connector
ITEM
PART CODE
P04400
P04400
P04400
P04401
P04401
Pin
ITEM
PART CODE
P61020ASS16
P61020ASS16
P61020ASS16
P61020ASS16
P61020ASS16
QTY
9
10
10
12
13
QTY
9
10
10
12
13
QTY
9
10
10
12
13
QTY
20
22
22
26
28
Publicité
