Panasonic NN-SD780S Manuel D'utilisation page 18

IP4923_39U96CP_01_140417
Selecting Power
& Cook Time
Example: To cook at P 6 (MEDIUM)
power for 1 minute 30 seconds
1.
• Press Power Level
Press 5 times
2.
Time Dial
• Set Cooking Time,
Rotate
3.
• Press Start.
Press
once
twice
3 times
4 times P7 (MEDIUM-HIGH)
5 times
6 times
7 times
8 times P3 (MEDIUM-LOW)/DEFROST
9 times
10 times
NOTES:
1. For more than one stage cooking, repeat
steps 1 and 2 for each stage of cooking
before pressing Start Button. The maxi-
mum number of stages for cooking is 5.
When operating, two beeps will sound
between each stage. Five beeps will
sound at the end of the entire sequence.
2. When selecting P10 (HIGH) power for
the first stage, you may begin at step 2.
3. When selecting P10 (HIGH) power, the
maximum programmable time is 30 min-
utes. For other power levels, the maxi-
mum time is 90 minutes.
4. For reheating, use P10 (HIGH) for liq-
uids, P7 (MEDIUM-HIGH) for most foods
and P6 (MEDIUM) for dense foods.
5. For defrosting, use P3 (MEDIUM-LOW).
DO NOT OVERCOOK. This oven requires
less time to cook than an older unit.
Overcooking will cause food to dry out and
may cause a fire. A microwave oven's
cooking power tells you the amount of
microwave power available for cooking.
2014.4.17
until the desired
power level appears
in the display window.
using Time Dial to 1
minute and 30 sec-
onds.
➤Cooking will start.
The time in the
display window will
count down.
Power Level
P10 (HIGH)
P9
P8
P6 (MEDIUM)
P5
P4
P2
P1 (LOW)
9:12 AM Page 16
Quick Min Feature
This feature allows you to set or add
cooking time in 1 minute increments up to
10 minutes.
To Set Cooking Time:
1.
2.
NOTES:
1. If desired, you can use other power
levels. Select desired power level
before setting cooking time.
2. After setting the time by Quick Min
Button, you cannot use Dial.
3. Quick Min Button can be used to add
more time during manual cooking.
Keep Warm Feature
This feature will keep food warm for up to
30 minutes after cooking.
Example: To keep 2 cups of gravy warm
1.
2.
Time Dial
Rotate
3.
NOTE:
Keep Warm can be programmed as the
final stage after cook times have been
manually entered. It cannot be used in
combination with sensor or auto features.
16
• Press Quick Min until
the desired cooking
time (up to 10 min-
utes) appears in the
display window.
Power Level is pre-set
at P10.
Press Start.
Cooking begins and the
time will count down.
At the end of cooking,
5 beeps sound.
• Press Keep Warm.
• Set warming time, up
to 30 minutes.
• Press Start.
➤Keep Warm will
start. The time in
the display window
will count down.