Télécharger Imprimer la page

Napoleon CLEARion Elite Manuel D'installation Et D'opération page 22

Pour l'utilisation intérieur seulement
Masquer les pouces Voir aussi pour CLEARion Elite:

Publicité

Les langues disponibles

Les langues disponibles

operating instructions
EN
5.3 timer settings on remote control
Timer: Displays current day, time, and week.
Press to enter or confi rm timer settings.
Settings: Press to move to next step (use
with Timer button). Press to confi rm week
timer.
Back: Press to clear timer settings. Press to
return to the previous step (use with Settings
button).
Up and down: Use with Settings button.
LCD Screen
Weekday:
Mon., Tues., Wed., Thurs., Fri., Sat., Sun.
Time Display:
Current Time / Timer From 00:00 to 24:00
NOTE: 00-12:00 is AM / 13:00 - 24:00 is PM
5.3.1 set current day and time
1. Press
once. When "MON" (Monday) begins fl ashing, use
plete the setting.
2. When the hour digits begin fl ashing, use
3. When the minute digits begin fl ashing, use
ting.
5.3.2 set ON/OFF time and temperature on a weekly cycle
1. Press
once. When "MON" (Monday) begins fl ashing, use
plete the setting.
note:
The timer can only be adjusted in 30-minute intervals (i.e. 00:00 - 00:30; 00:30 - 01:00, etc.).
2. When --:-- begins fl ashing, use
to complete the setting. Press
3. When "18" begins fl ashing, use
note:
If the temperature was previously set, those digits will be shown instead of "18".
4. When --:-- begins fl ashing, use
to complete the setting. Press
22
W415-3030 / A / 10.29.21
to select the current hour. Press OK to complete the setting.
to select the current minute. Press OK to complete the set-
to select the desired hour and minutes to turn on the heater. Press OK
at any time to clear the digits and shut down "ON" timer.
to select the desired temperature to turn on the heater for Monday.
to select the desired hour and minutes to turn off the heater. Press OK
at any time to clear the digits and shut down "OFF" timer.
NOTE: The func-
tions can only be
adjusted when the
related letters or
digits are fl ashing.
NOTE: Calibrate
the timer to cur-
rent time before
the weekly set-
tings.
to select current day. Press OK to com-
to select current day. Press OK to com-

Publicité

loading