operating
instructions
EN
note:
When only the heat is on (i.e. no fl ames, no ember bed lights, etc.), the display window will be dim and show H1
or the chosen temperature.
When only the fan is on (i.e. no fl ames, no ember bed lights, etc.), the display window will be dim and show
FAN.
After the heater is turned off, the blower will continue running for 10 seconds. This helps to remove heat from
the appliance and bring down its temperature.
Power
Privacy
Glass
Control
Orange
Flame
Blue
Flame
Ember
Bed
Brightness
20
W415-3030 / A / 10.29.21
Turns appliance on and off.
Controls the privacy glass.
Settings:
G-1 - Half transparent mode (default)
G-2 - Full transparent mode
G-0 - No transparent mode
Press and hold the button for 5 seconds to lock/unlock the
privacy glass to G-0 status. When unlocked, the appliance will
return to G-1 (default).
Controls orange fl ame brightness.
Settings:
OF4 - Brightest fl ame
OF3 - Bright fl ame
OF2 - Dim fl ame
OF1 - Dimmest fl ame
OF0 - Flame off
Controls blue fl ame brightness.
Settings:
BF4 - Brightest fl ame
BF3 - Bright fl ame
BF2 - Dim fl ame
BF1 - Dimmest fl ame
BF0 - Flame off
Controls the brightness of the ember bed light.
NOTE: If the ember bed colour is set to L16, the ember bed
brightness setting cannot be changed.
Settings:
B-5 - Fade in and out
B-4 - Brightest
B-3 - Bright
B-2 - Dim
B-1 - Dimmest
B-0 - Off
Continued on next page