4.1
front
trim
removal
/
installation
WARNING
!
•
Before the front trim or glass is removed or installed, unplug the appliance and wait until it is cool to the touch.
•
Trim can be heavy and fragile. Handle with care.
note:
Removal / installation steps are the same for both sides of appliance (i.e. front and back).
Remove the 2 screws holding the front trim in place (Fig.
4-1). Set screws aside.
A.
Have 2 people lift the front trim off the hooks located inside the fi rebox (Fig.
4-2). Place front trim face
B.
down on a soft, non-abrasive surface.
Reverse these steps to install the front trim.
C.
Repeat on
opposite side.
4.2
front
glass
removal
/
installation
Remove the 5 screws holding the front glass in place
(Fig.
4-3).
A.
Have 2 people lift the front glass up and out, pivoting it away from the side panels
(Fig.
4-4). Place the
B.
front glass face down on a soft, non-abrasive surface.
Reverse these steps to install the front glass.
C.
Repeat on
opposite side.
Fig.
4-1
1
2
opposite side.
Fig.
4-3
4.0
fi
nishing
Some parts
hidden for
clarity.
Repeat on
opposite side.
1
2
Repeat on
W415-3030 / A / 10.29.21
EN
Fig.
4-2
Fig.
4-4
17