Publicité
Les langues disponibles
Les langues disponibles
GB
Round spray nozzle: 0.8 mm
Weight:
Oscillation level:
Materials to be used:
Paints and varnishes containing solvents, acrylic enamel paints, water-soluble varnishes,
glazes, polishes, wood preservatives, disinfectants, plant protectives, saturants, as well as
oils and other watery liquids.
The following spray substances are not suitable for use:
Dispersion and latex paints, materials containing strong abrasives, glazes with coarse
particles, strippers and caustic solutions, silicate paints. Use of these spray materials can
lead to increased wear or corrosion damage in the pump area, which are not covered by
the WAGNER-Guarantee.
Preparing the Spray Material
The paints usually need to be diluted for use with the spray gun. You will find guidelines
for sprayable dilutions in the following viscosity table (viscosity = consistency of the paint).
You can achieve the correct dilution by using the viscosity test cup.
Spray Material
Thinner-soluble varnishes/
primers
Water-soluble varnishes /
primers
Automobile spray paint
Wood preservatives,
disinfectants, plant protectants,
polishes, strippers, oils
Hammer effect enamel
Aluminium paints
Measuring the Viscosity
Dip the viscosity test cup (Illus. 1) completely into the spray material. Hold the test cup up
and measure the time (in seconds) until the liquid empties out. Compare the measured
"runout time" with the Viscosity Table.
12
Technical Data
1.5 kg
10.5 m/s²
Handling Table for Viscosity
Viscosity: (Runout time in seconds)
Sound pressure
level:
Sound pressure
output:
20-35
20-50
18-22
undiluted
25-35
20-30
W 140 P
86 dB(A)
99 dB(A)
20-45
20-60
18-22
30-45
20-30
Publicité
