Publicité
Les langues disponibles
Les langues disponibles
Door Panels and Cabinetry Clearance - Door Swing 110°
The custom door panels and adjacent cabinetry must be designed so that there is sufficient clearance for the doors to swing open. If
the refrigerator is to be installed close to the wall, see Door Swing 90° on following page.
Refrigerator to
Cabinetry Clearance
Door swing 110° actual size
NOTE: Rout the hinge side of the
custom door panels to a radius that
is equal to at least half the thickness
of the panel if a 130° door swing is
desired. See Adjust Doors.
When the doors are closed the refrigerator will extend beyond the face of the adjacent cabinetry to some degree.
Installation Requirements
Hinge
Refrigerator
Side Trim
1 ½"
(3.8 cm)
1 ¼"
(3.2 cm)
1"
(2.5 cm)
Cabinetry
½"
(1.3 cm)
¾"
(1.9 cm)
(2.5 cm)
¼" (6.35 mm)
½" (1.3 cm)
¾" (1.9 cm)
1" (2.5 cm)
NOTE: Allow ½ (1.3 cm)
clearance between
overlay panel and
cabinetry.
1"
1 ¼
"
(3.2 cm)
1½
"
(3.8 cm)
7
Publicité
