Napoleon GDS25N-1 Instructions D'installation Et D'opération page 27

5.3 GLASS DOOR INSTALLATION AND REMOVAL
GLASS MAY BE HOT, DO NOT TOUCH GLASS UNTIL COOLED.
Remove safety barrier.
A.
Lift the top cast piece off of the appliance.
B.
C. Pull handle and rotate 90°.
Slide the door straight up to remove.
D.
Follow the above steps in reverse in order to reinstall the door. En-
sure that the bottom of the door engages the door retainer before
closing the latches.
5.4 LOG PLACEMENT
LOGS MUST BE PLACED IN THE EXACT LOCATION IN APPLIANCE. DO NOT CHANGE FROM THE
PROPER LOG POSITIONS. APPLIANCE MAY NOT FUNCTION PROPERLY.
THE LOGS ARE FRAGILE AND SHOULD BE HANDLED WITH CARE.
It is not necessary to remove the cast front, however, this will make for a more simple log installation.
In order to assemble the log set, the glass door must be removed, see "CAST FRONT / GLASS DOOR
INSTALLATION AND REMOVAL" section.
LOG LOCATING SCREWS
All manuals and user guides at all-guides.com
WARNING
!
DO NOT USE SUBSTITUTE MATERIALS.
WARNING
!
DOOR
BRACKET
A.
Place the rear log, as shown, onto the rear
log support brackets. Ensure the cutout on
the left underside of the log, fits over the pilo-
tassembly. Bend the bracket on the left side
to help retain the rear log.
27
EN
LATCHES
W415-2207 / A / 08.28.17