Publicité
Les langues disponibles
Les langues disponibles
In accordance with the degree defined on the test track, perform the water hardness
setting of your machine as indicated below.
•
Set the On/Off button (4) to off position (1).
•
Press and hold Start/Pause (3) key.
•
Set the On/Off button (4) to number 2 position by rotating it clockwise (righ-
tward) 1 step.
•
Hold your finger on the Start/Pause (3) key till all the lights flash and then the
"water hardness degree indicator" predefined on your machine is displayed, (see
setting table for water hardness degree).
•
You can configure the settings according to the setting table for water hardness
degree by pressing Start/Pause key (3).
•
After selecting the water hardness degree, cut off the power of the machine by
switching the On/Off button (4) to off position (1). The last selected water hard-
ness setting will be stored in the memory.
Warning:In case of moving, to configure the water hardness setting according to
the water hardness of the area you have moved is important for the effectiveness of
washing.
All manuals and user guides at all-guides.com
17
4
Publicité
