Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
ENGLISH
Prior to using the machine for the first time
Check whether the electricity and supply water specifications match the values indicated by the
•
installation instructions for the machine.
Remove all packaging materials inside the machine.
•
Set the water softener.
•
Add 1 kg salt into the salt compartment and fill with water up to a level at which it will almost
•
overflow.
Fill the rinse aid compartment.
•
PREPARING THE MACHINE FOR USE
The importance of water decalcification
For a good washing function, the dishwasher needs soft, i.e. less calcareous water. Otherwise, white
lime residues will remain on the dishes and the interior equipment. This will negatively affect your
machine's washing, drying and shining performance. When water flows through the softener system,
the ions forming the hardness are removed from the water and the water reaches the softness
required to obtain the best washing result. Depending on the level of hardness of the inflowing water,
these ions that harden the water accumulate rapidly inside the softener system. Therefore, the
softener system has to be refreshed so that it operates with the same performance also during the
next wash. For this purpose, dishwasher salt is used.
Filling with salt
When you start your dishwasher, the salt compartment gets filled
with water. Therefore, put the softener salt prior to starting your
machine.
This way, overflowing salt gets immediately cleaned up through the wash operation. If you are
not going to wash any dishes immediately after putting salt, then run a short washing program
with an empty machine in order to avoid any damage ( to prevent corrosion ) to your machine due
to the salt overflow while filling in the salt container.
All manuals and user guides at all-guides.com
Use
softener
salt
produced for use in dishwashers. To
put softener salt, first remove the
lower basket and then open the salt
compartment
cap
by
counter clockwise.1 2 At first use fill
the compartment with 1kg salt and
water3
at
overflowing
available,using the funnel 4provided
will make filling easier. refit the cap
and close it After every 20th-30th
wash, add salt into your machine
until it fills up (approx. 1kg)
Fill the salt compartment with water
at first use only.
We recommend that you use small-
grained or powder softener salt.
Do not put table salt into your machine.
Otherwise, the function of the softener
compartment may decrease over time.
15
specifically
turning
it
level
If
Publicité
