Braun Oral-B Triumph ProfessionalCare 9000 Mode D'emploi page 6

6
All manuals and user guides at all-guides.com
Description of Oral-B T
Description of Oral-B T
a Oral-B FlossAction brushhead
b On/off button
c Brushing mode button
d Handle
e SmartDisplay
f SmartPlug charger (includes charging ring and SmartPlug)
g Base plate
h Base station
i Protective cover
j Oral-B
Connecting and char
Connecting and char
Oral-B Triumph has a waterproof handle, is electrically safe
and is designed for use in the bathroom.
To assemble the base station (h) as a charging unit, detach
the base plate (g) first (1, page 3). Place the charging ring into
the base station and attach the base plate as shown (2 and
3, page 3). Then insert the protective cover (i) on the back of
your base station (see diagram 4, page 3).
• Plug the SmartPlug into an electrical outlet and place the
toothbrush handle (d) on the charging unit. Alternatively,
12 h
Oral-B Triumph can be charged by placing the handle
directly into the charging ring while the SmartPlug is
plugged in.
• A battery symbol should appear in the SmartDisplay. The
battery symbol will fill up while the handle is being charged
and «Charging» will be displayed. When the handle is fully
charged, the SmartDisplay shows «Full Charge». A full
Full Charge
charge takes at least 12 hours and enables approximately
two weeks of regular brushing.
Please note: If the battery symbol is not displayed
immediately, continue charging. It will appear in 10 - 15
minutes.
• When the rechargeable battery is low, the bars of the
battery symbol will disappear and «Low» will be displayed.
Your toothbrush will slow down and then stop. It is time
to recharge Oral-B Triumph. When the battery is fully
discharged, «Empty» is displayed. It will then need a
15-minute charge before you can use it for a 2-minute
brushing.
® PowerPolisher™ brushhead (not with all models)
riumph
riumph
ging
ging