Silhouette Professional DIM32D1BSSPR Manuel Du Propriétaire page 49

CONNECTING ICE MAKER TO DRAIN
Drain Type
Manual Drain • Manually drain
Mode the water from
the ice bucket
When water
reaches the
tray in the ice
bucket, remove
ice bucket and
drain the water
(to reduce the
ice from stick-
ing together).
NOTE: When pushing the unit into place, make sure the water line and drain lines are not kinked. The lines
should not be left in such a way that they may rattle against the unit.
To view our online installation video, visit: www.silhouetteappliances.com
INSTALLATION INSTRUCTIONS
Drain
• There is no drain hole
in the room
Drain Height
Reference Fig. B, C and D
1. Ensure the screw nut and switch are in the
2. Periodically check the ice bucket (1) and
3. When draining off the water, you can re-
7
Operation Instructions
Drain nut and drain pump switch
Drain nut (front) (3) + drain seal (front) (4)
Drain nut (back) (7) + drain seal (back) (6) Closed
Drain cap (11)
Drain cap (12)
Drain pump switch (8)
above condition to avoid water leakage.
water level sight (5). If the water level
exceeds the sight water level, drain off
unnecessary water.
move the ice bucket (1), drain nut (front) (3)
and drain seal (front) (4). Use the ice tray to
take out the unnecessary water, then tight-
en the above screw and seal washer.
Condi-
tion
Closed
Closed
Closed
OFF