Publicité
Les langues disponibles
Les langues disponibles
V4.0
4.
Do not pump the following liquids to avoid hazardous situations or
pump damage:
a.
Flammable liquids such as fuel or fuel oils.
b.
Hot liquids. These will overheat the pump, which can damage its seals
or lead to a burn injury.
c.
Sea water, beverages, acids, chemical solutions and other liquids that
promote corrosion.
5.
Do not run the pump dry. This will cause cavitation in the pump
mechanism and can damage the pump beyond repair. Prime the pump with
water before starting.
6.
Do not allow the pump or other system components to freeze. This can
damage the pump during operation.
7.
Do not obstruct the suction or discharge hose.
8.
Do not run the pump against a closed discharge. This will overheat the
pump, which can damage its seals or lead to a burn injury.
9.
Do not operate the pump without a strainer basket connected to the end of
the suction hose.
10. Anchor the pump to avoid equipment movement. The load from the hoses
can cause the pump to tip over.
11. Keep the machine away from the edge of a river or lake where it could
cause the bank to collapse.
12. Do not move the machine by pulling on the hoses. Hold the unit's frame
when moving it.
13. Use the correct tool for the job. This tool was designed for a specific
function. Do not modify or alter this tool or use it for an unintended purpose.
14. This water pump is not for use in mobile equipment or marine applications.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Visit www.princessauto.com for more information
All manuals and user guides at all-guides.com
3 in. Gas Water Pump
8661621
5
Publicité
