Power Fist 8661621 Mode D'emploi page 12

8661621
3. Remove the primer plug from the top of the pump and flush the internal
components with clean water.
4. Reinstall the plugs and tighten securely.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for electronic
devices, batteries, oil or other toxic liquids.
IMPORTANT! DO NOT pollute the environment by allowing uncontrolled
discharge of waste oil.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
Problem(s)
Motor does
not run.
12
All manuals and user guides at all-guides.com
3 in. Gas Water Pump
Possible cause(s)
1. Disconnect switch is off.
2. Fuse is blown.
3. Starting switch
is defective.
4. Pressure switch contacts
are dirty.
For technical questions call 1-800-665-8685
Fig. 10
Suggested solution(s)
1. Turn disconnect switch on.
2. Replace fuse.
3. Disconnect power, replace
starting switch.
4. Disconnect power and file
contacts with emery board or
nail file.
V4.0