Power Fist 8661621 Mode D'emploi page 11

V4.0
1. Remove the priming
plug from the top of
the pump.
2. Add clean water to the
pump until it reaches
the top of the
discharge outlet.
3. Reinstall the priming plug.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3. Only use accessories intended for use with this tool.
4. Maintain the tool's labels and name plates. These carry important information.
If unreadable or missing, contact Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
DRAINING & FLUSHING THE PUMP
1. Disconnect and drain the suction and discharge hoses.
2. Remove the drain plug at the bottom of the pump.
Visit www.princessauto.com for more information
All manuals and user guides at all-guides.com
3 in. Gas Water Pump 8661621
Fig. 8
Fig. 9
11