Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
The dough hook with the small washer
and foot goes into the socket on the
side of the mixer nearest the side of
the bowl. The other dough hook with
the large washer goes into the socket
nearest the center of the bowl. See the
dough hook symbols located on the
bottom of the mixer head.
B
-B
D
A
EATER
OWL
RIVE
DJUSTMENT
Automatic bowl rotation is factory set.
Occasionally, a simple adjustment
may be necessary when the bowl
fails to rotate.
To make this adjustment, tilt the mixer
head back. Hold the mixer head in an
upright position and locate the
adjustment screw on the underside
of the mixer head. Loosen the locking
nut and turn the adjustment screw on
the underside of the mixer head.
Loosen the locking nut and turn the
adjustment screw clockwise, to lower
the mixer head; or counter clockwise,
to raise the mixer head. Retighten the
locking nut. The beater with the nylon
button should lightly touch the bottom
of the mixing bowl.
Adjustment
Screw
O
PERATING
A
S
BOUT THE
PEED
The speed control dial is used
for turning the mixer ON and OFF
and for selecting its 12 mixing speeds.
Rotate the speed control dial in a
clockwise direction to increase mixing
speed; and in a counter-clockwise
direction to decrease mixing speed.
As you rotate the speed control dial,
notice that a numbered speed
is aligned with the indicator on top
of the mixer head. This numbered
speed indicates the speed at which
the mixer is operating.
Rotate the speed control dial until
the indicator is opposite the numbered
speed you wish to use.
Speed
Indicator
Mixing
Guide
B
P
URST OF
OWER
Press down on button or top handle to
automatically increase the beater speed
by 150 RPM for an immediate boost
of power.
H
L
EAD
OCK
The head lock feature locks the mixing
head in the down position for added
Locking
control while mixing and locks it in the
Nut
up position for added convenience while
cleaning. To unlock, press down the
button on the side of the stand. To lock,
lower mixing head until it automatically
locks in place.
7
I
NSTRUCTIONS
C
D
ONTROL
IAL
Speed Control
Dial
®
Publicité
