Publicité
Les langues disponibles
Les langues disponibles
Assembling Your NEUTON Mower
To allow you to quickly begin using your NEUTON Mower, it was shipped to you partially assembled. The assembly process is
easy and does not require any special tools, knowledge, or strength.
Assembling your NEUTON Mower takes just a few steps:
Step 1: Read the Safety & Operating Instructions before proceeding.
Step 2: Remove the Battery.
Step 3: Attach and Adjust the Handlebar.
Step 4: Charge the Battery before your first use.
Step 5: Attach the Side Discharge Chute, Mulching Plug, or Rear Bagger.
Step 6: Insert the Battery after being fully charged.
Step 7: Adjusting the Cutting Height.
NOTE: See Figure 22 on page 10 for a photograph of the fully assembled Mower.
Remove the Battery and Safety Key during assembly, adjustments, cleaning, Blade replacement, or when the Mower is not in
use. Removing the Safety Key and Battery will prevent accidental starting, and help avoid serious personal injury.
Step 1: Read the Safety & Operating Instructions before proceeding.
The NEUTON Mower is a motorized cutting machine that uses a sharp Blade. For your safety, and for best results, it is important
to read the information in "Chapter 1: Important Safety Considerations" before you assemble or use the Mower.
To familiarize yourself with the assembly, features, and operation of your Mower, please read the remainder of this manual
before proceeding.
NOTE: Do not discard the shipping box and packaging material until you are fully satisfied with your new NEUTON Battery-Powered
Mower.
Step 2: Remove the Battery.
You can quickly and easily remove the Battery from your
Mower.
1.
Push the Cover Latch back to open the Access
Cover (Figure 2).
Push the Cover Latch back with one hand and
TIP
hold the Cover with the other, as the Cover is
spring loaded. Once released, allow the Cover
to open toward the front of the Mower.
2.
Twist the Battery Retainer Arm either way until it is no
longer blocking the Battery (Figure 2).
To help keep the Mower from rolling while
TIP
removing the Battery, put one foot behind a
wheel for stability.
3.
Pull the Battery straight up and remove it.
NOTE: Use care, as the Battery is heavy.
NEUTON CE 6.3 Battery-Powered Mower -
Access Cover
Figure 2
Safety & Operating Instructions
Wrenches
Battery
Retainer
Arm
Cover Latch
5
Publicité
