AIPTEK GS 372 Mode D'emploi page 3

All manuals and user guides at all-guides.com
Welcome
Thank you very much for purchasing this product. Before you start,
you are recommended to read this manual step by step to obtain the
best results with your new auto camcorder. We hope you enjoy it.
About the Product
GS 372 is specifically designed for video recording whilst driving. In
the case of an emergency, the embedded bump sensor automatically
detects the accident and saves the action on protected memory.
Unlike most dashcams, the rear-view mirror design and invisible LCD
display allow GS 372 to be kept permanently in the car without being
mounted and dismounted for each trip. The extra-large and anti-
glare mirror provides a better rear view to enhance driving safety.
Built-in with 130 ° wide-angle and adjustable lens, GS 372 works
perfectly with both passenger cars and trucks. With Full HD
resolution, GS 372 records full action on the road in the best quality.
Important Notice
1. Please do not install this auto camcorder at a place that would
obstruct or reduce a driver's view. Make sure your usage
complies with the vehicle codes of your state or country.
2. Do not drop, puncture or disassemble the device and charger;
otherwise the warranty will become void.
3. Avoid all contact with liquids. Dry your hands before using the
device.
4. Use the device with care. Avoid pressing hard on the device
body.
5. Only use the accessories supplied by the manufacturer.
6. Keep the device out of the reach of infants.
7. When you get out of the car, do not leave the device on the
dashboard where it is subject to direct sunlight or extreme
1
AIPTEK Team