Peavey Architectural Acoustics MMA81502 Mode D'emploi page 12

All manuals and user guides at all-guides.com
The loudspeaker outputs of the mixer/amplifier are 4 Ohms, 8 Ohms, 70V and 100V. Connect the
MMA8352 (120V)
loudspeaker system to any ONE of these outputs. Class 2 wiring may be used.
There are two types of output: 4 Ohm Direct Output;
8 Ohm, 70V, and 100V via Output Transformer
The method of connection differs in each case. Refer to Figure 7. If using the transformer
isolated outputs be sure that the Low Cut switch is ON.
Note: Impedance values shown in Figure 7 indicate total loudspeaker system (load) impedance.
Figure 7
12