AIRFORCE F204 Prescriptions De Montage Et Mode D'emploi page 24

GB
TSE
A: Light ON/OFF key: press this touch sensor to switch on or off the lights of the hood.
F
B: Motor ON/OFF key (4 speed): press this touch sensor to switch on the hood extractor fan
E
at the same speed as it was when last switched off. Use the „D" and „C" keys to vary
the speed (power) of extraction.
D
C: Decrease extraction speed (power) key: press this touch sensor to reduce the extraction
speed of the hood.
D: Increase extraction speed (power) key: press this touch sensor to increase the extraction
speed of the hood.
C
E: Timer key: irrespective of the extraction speed selected, touching the key will
activate the timer function for 5 minutes (during this phase a dot will flash on and off
on the display). To reset the timer operate the E motor key.
B
F: Filters reset key: touching this key will reset the metal anti-grease filter (1) saturation
A
and carbon filter replacement (2) warning. (1) After the hood has been operating for
40 hours, the "FG"or"G" symbol on the display will begin to flash, indicating the need
to clean the metal antigrease filters.
(2) After the hood has been operating for 120 hours, the "FC"or"C" symbol on the display will begin
to flash, indicating the need to clean the active carbon filters.
Automatic Sensor: tapping both "C" and "D" keys at the same time will activate the "Automatic Sensor"
function. This function, indicated with an "A" on the display, automatically sets the hood at the best
extraction speed, depending on the cooking going on. To return to manual operation, press "C" or
"D" button.
Note: 4 hours after the last key touch, the fan will automatically turn off.
All hoods with capacities exceeding 650 m3/h have the last timed speed; It lasts for 7 minutes,
after which it automatically returns to the last non-timed speed.
OPERATION
24