Publicité
Les langues disponibles
Les langues disponibles
CONFIGURATION OF APARTMENT STATIONS BRACKETS
Default values: all video door phones default confi guration is the following:
USER = 127
INTERNAL CODE = 0
Therefore, for the proper operation of the system, always pay attention to dip switches, in order to
confi gure them with the correct value.
§
For dip switch settings, see the system manual provided with the power supply Ref. 1083/20.
CODE: user code.
Set a number from 0 to 127, according to the following rules:
•
In the column there must not be any apartments with the same user code.
•
If there are apartment stations in parallel in the same apartment, these must have the same user code.
•
The user codes of the same column must be consecutive.
§
To set the desired code, use the dip switches from 2 to 8 (2= most signifi cant bit - 8= less signifi cant
bit); the dip-switch 1 must be set to OFF.
INT: apartment internal code.
Set a number from 0 to 3, according to the following rules:
•
If in the apartment there is only one station, the internal code must be set to 0.
•
In apartments, up to 4 apartment stations in parallel with the same user code and different internal codes
can be connected.
The internal code identifi es each station of the same user. This means that intercom calls can be addressed
to the single internal code in the same apartment.
In case of intercom calls to different apartments, in case of calls coming from door units and in case of fl oor
call, all the user apartment stations always ring. Consider also the following information:
•
after receiving a call, the internal code 0 rings immediately; the internal codes 1, 2 and 3 ring in
sequence.
•
If the call comes from a video call station, the internal code 0 turns the monitor on.
However, the other apartment stations of the same user can press the button
phone, turning off the other ('video transfer' function).
LINE TERMINATION SETTING
Line termination
ON
On the video door phone there is a jumper which allows to insert the line termination. The termination must
be activated in all the devices installed at the end of a line that does not start again with another segment
from the terminal pins LINE OUT:
14
All manuals and user guides at all-guides.com
O N
O N
=
=
to turn their video door
OFF
LINE OUT
LINE 3
1083/55
LINE 4
LINE IN
FEATURES
CALL RECEPTION AND 'VIDEO TRANSFER' FUNCTION
When a call is received, the user apartment station rings with the programmed tone, according to the
source:
•
From main door unit
•
From secondary door unit
•
From Intercom
•
From fl oor call
•
From switchboard
When the door phone or video door phone call is received, it is always possible to activate the door unit
electric lock also without activating the communication.
If in the apartment there are several apartment stations in parallel, the stations ring in sequence. The user
internal code 0 also performs the video door phone power-on, if the call comes from a video door phone
call station. In this case, during the off-hook waiting time (60s from the call), the other internal codes can
turn their video door phone on by pressing the auto-on button
the video door phones of the called user answers.
If the image is already displayed, press the button
control cameras of the caller station only.
After picking the handset up, the image coming from the main camera will only be displayed in the apartment
stations which has answered.
Therefore the camera image will be displayed on one apartment station at a time.
ANSWERING THE CALL
By pressing the button
blinking). By pressing again the button, the communication is closed and the display turns off.
DOOR LOCK RELEASE DURING A CALL AND OPEN DOOR INDICATION
After a call is received from a door unit or during the communication with a door unit, the pedestrian or
driveway gate can be opened by pressing the buttons
If the call modules are provided with open door sensor (and the absence service is not active), the led
can indicate if the door is really open or not: the led lights up steady if the open door is the main one, and
blinks if the open door is the secondary one.
DS1706-011
DS1706-011
Termination
ON
LINE OUT
Termination
OFF
LINE IN
LINE 1
LINE 2
to cyclically display images coming from other
, the user establishes a communication with the caller (the button pressed starts
and
Termination
Termination
ON
ON
LINE OUT
LINE 3
LINE 1
1083/55
LINE 4
LINE 2
LINE IN
('video transfer' function), until one of
respectively.
15
Publicité
