bloom fresco Instructions D'installation page 25

eng
storage compartment door located on the
inner face of the seat unit.
– (#18 comfort nest tab with screws) Assemble
the comfort nest attachment tab to the storage
compartment by screwing the two screws
provided with a philips head screwdriver.
– (#16 comfort nest ) Insert comfort nest onto tab.
– (#06 safety harness, #15 nest pad) Put
shoulder straps through the nest pad slits at
the desired height setting.
– Put waist straps through the nest pad side
slits, and the crotch strap through the bottom
slit.
– (#10 seat unit) Behind the nest pad, slide the
buckle on the end of the shoulder straps into
the buckle slots located on the inner face of
seat unit. Check the straps are secured by
pulling on the straps.
– (#09 storage compartment) Behind the nest
pad, slide the buckle on the end of the waist
straps into the buckle slots on either side of
the storage compartment. Check the straps
are secured by pulling on the straps.
– Close the compartment door.
– Thread the crotch strap through opening in
the comfort nest.
– Place the comfort nest into the seat unit, and
then press in towards the backrest.
WARNING:
Always use the safety harness.
To remove the seat pad & safety harness for
cleaning, follow the instructions given in the care
& maintenance section of this user guide.
8
All manuals and user guides at all-guides.com
e5
Locking the Safety Harness:
Lock the harness by pushing the tongues on
the ends of the waist straps, connected with the
ends of the shoulder straps, into the buckle on
the crotch strap.
The harness will automatically lock when the
tongues have been fully pushed in. You will hear
an audible click.
Unlocking the Safety Harness:
Squeeze the ends of the tongues together and
then slide them out of the buckle.
Adjusting the Shoulder Straps Height:
As your child grows you will need to alter the
height of the shoulder straps. The time to do this
is when the child's shoulders are above the slits
on the seat pad, where the shoulder straps pass
through.
NOTE: Every time you place your child in the
baby chair or whenever you alter the position
of the seat always check that the harness is
correctly fitted. Tighten the harness until it fits
snugly around your child.
e6
– (#12 'C' shaped clips) From storage
– (#17 comfort nest lock) Place buckle on the
Using and Adjusting the Safety Harness
Without Safety Bar
compartment, take out the two 'C' shaped
clips. Close the compartment door.
end of the crotch strap into the base of the
comfort nest lock, then slide lock into seat
unit. (The strap and buckle must not be