bloom fresco Instructions D'installation page 23

eng
and to ensure that the harness is secure
and performs correctly. No lubrication is
necessary.
• Always check the tray is securely locked
in place by attempting to pull it free of the
highchair.
• IMPORTANT: Every time you place your
child in the highchair or whenever you alter
the position of the seat, always check that
the harness is correctly fitted. Tighten the
harness until it fits snugly around your child.
– refer to illustrations section e
e - e5 Comfort Nest Assembly
Please follow p.7-8 of instructions.
e7 - e8 Safety Bar, Nest Pad & Safety Harness
Assembly
Please follow p.9 of instructions – comfort nest
installation with safety bar.
– refer to illustrations section c
c Footrest Assembly and Footrest Adjustment
– (#07 footrest) Slide in footrest until you hear
an audible click. Check footrest is secured by
pulling it downwards.
– To remove footrest, press button located on
the end of the footrest attached to the seat
unit, whilst sliding the footrest out toward the
back of seat unit.
– The footrest has three height positions. Press
the button on the back of the footrest, whilst
sliding footrest up or down to your desired
6
All manuals and user guides at all-guides.com
c
– (#03 mini tray) Latch the hook located on the
– Lock the mini tray into position by pressing
– To remove the mini tray, reverse the order of
– The mini tray is dishwasher safe, and is made
c
– (#04 food tray) Squeeze the left and
– The food tray can be locked in two positions.
– To adjust the tray, pull the left and right side
– To remove the food tray, reverse the order of
– The food tray is dishwasher safe, and is
position. The footrest is locked into position
when you hear an audible click. Check
footrest is secured by pulling it downwards.
Mini Tray Assembly
bottom of the mini tray onto the safety bar
whilst rotating the tray downwards.
down on the left and right arm of the tray. The
pegs should snap into the holes on the tray.
You will hear an audible click.
assembly steps.
of FDA compliant food contact grade plastic.
Food Tray Assembly
right trigger located under food tray
simultaneously, whilst sliding the food tray
onto the mini tray, then release triggers at
your desired setting. You will hear an audible
click. Check the food tray is locked in place by
attempting to pull it free of the highchair.
triggers located under the tray simultaneously
whilst sliding the tray forwards or backwards.
Release triggers at the desired setting. You
will hear an audible click. Check the food tray
is locked in place by attempting to pull it free
of the highchair.
assembly steps.