Publicité
Les langues disponibles
Les langues disponibles
•
Leave a space between the food items to allow the air to circulate freely and avoid different
products contaminating each other.
•
Do not put packages and food in contact with the wall at the back of the appliance, this is a
particularly cold and damp area of the appliance and water droplets and frost condense there
as part of your refrigerator's normal operation.
•
The coldest area, indicated by the logo "OK" (depends the model), is designed for delicate,
sensitive and highly perishable food: meat, poultry, fish, cooked meats, prepared dishes,
ready-made salads, egg or cream-based dishes and pastries, fresh pasta, pastry,
pizza/quiches, fresh produce and raw milk cheese, ready- to-use vegetables sold in plastic
bags and, more generally, any fresh product whose consume-by date is linked to its storage
at a temperature of +4°C or below.
6. CARE AND MAINTENANCE
Defrosting
The defrosting of the refrigerator part of your appliance is fully automatic. The defrost water flows to a
collection tank located at the rear of the unit.
Cleaning the fridge
After defrosting you should clean the fridge internally with a weak solution of bicarbonate of soda.
Then rinse with warm water using a damp sponge or cloth and wipe dry. Wash the baskets in warm
soapy water and ensure they are completely dry before replacing in the Fridge.
Condensation will form on the back wall of the Fridge; however, it will normally run down the back
wall and into the drain hole behind the salad bin.
Use standard non-abrasive detergent diluted in warm water to clean the fridge exterior.
Do not use harsh cleaners, scouring pads or solvents to clean any part of the fridge
If you're going on vacation
If your appliance is not to be used for several months, remove all food, turn off and unplug the
appliance. Clean and dry the inside and outside of the appliance thoroughly. Also leave the door
open, blocking it if necessary, to prevent condensation, odors, mold.
Moving the unit
▪
Location
Do not place your refrigerator near a heat source, for example. Stove, boiler or radiator. Also, avoid
direct sunlight.
▪
Refrigerator upgrade
Make sure the refrigerator is level. Use the rotatable adjustable feet at the front. If the refrigerator is
not level, the doors and magnetic sealing alignments will be affected and may cause malfunctions.
▪
Do not turn on the refrigerator for 4 hours
After any movement, it must not be connected for 4 hours. This delay allows the coolant to be
adjusted.
▪
Installation
Let your device breathe. Heat is released from the walls so it is important to leave a circulation of air
around your device.
30
Publicité
