Use - Miele Swing H1 Mode D'emploi

This hard floorbrush is especially suit-
able for vacuuming floors with deep
gaps and crevices, e.g. old wooden
flooring.

Use

Unwind the mains cable (dia. 10)
The lower cable hook swivels.
 Turn it upwards to release the cable.
Adjusting the telescopic suction tube
(dia. 11)
(depending on model)
One part of the telescopic tube is
packed inside the other, and it can be
adjusted to suit your height for comfort-
able vacuuming.
 Press the release button and adjust
the tube to the desired height.
Connecting the vacuum cleaner
(dia. 12)
 Plug the vacuum cleaner into a suit-
able switched socket.
 When vacuuming hang the cable over
the cable hook on the handle (see de-
tail).
This way the mains cable will not get in
the way during vacuuming. This also
takes the strain off the cable-entry on
the vacuum cleaner.
Switching on and off (dia. 13 + 14)
There are two separate switches on the
carrying handle to enable the vacuum
cleaner to be conveniently operated in
any vacuum-cleaning situation.
Double slide switch
0 = Vacuum cleaner is switched off
min. = Reduced suction
max. = Maximum suction
Select min. for vacuuming lightweight
items such as curtains or rugs.
Select max. if using a turbobrush.
 To switch the vacuum cleaner on,
slide either switch to max.
 To switch the vacuum cleaner off,
push the slide switch to 0 until it
clicks.
To adjust the floorhead (dia. 15 – 18)
This vacuum cleaner can be used for
daily cleaning of carpets, rugs and ro-
bust hard flooring.
Miele offer a range of other floorheads,
brushes and accessories for other types
of flooring and special requirements
(see "Optional accessories").
Please observe the flooring manu-
facturer's cleaning and care instruc-
tions.
Clean hard flooring which is not sus-
ceptible to scratching, as well as floor-
ing with gaps or deep crevices in it with
the brush protruding:
 Press the  foot control.
This type of flooring can be briefly va-
cuumed with the brush retracted. Car-
pets and rugs should be vacuumed with
the brush retracted:
 Press the  foot control.
en
37