ADEUNIS LoRaWAN TEMP Guide Utilisateur page 4

LoRaWAN TEMP - Guide utilisateur / User guide version V1.2.0
ENGLISH
PRODUCTS AND REGULATORY INFORMATION
1. PRODUCT PRESENTATION
1.1. General description
1.2. Dimensions
1.3. Electronic board
1.4. Technical Specifications
FR 1.4.1 General characteristics
1.4.2 Autonomy
1.4.3 Sensor characteristics
2. PRODUCT OPERATION
2.1. Global operation
2.1.1 PARK MODE
2.1.2 COMMAND MODE
2.1.3 operating mode
2.1.4 REPLI mode
2.2. Operating modes
2.2.1 Periodic transmission
2.2.2 Transmission over threshold
2.2.3 Transmission of a daily Keep Alive frame
2.2.4 TEST mode
2.3. Operation of the LEDs
3. DEVICE CONFIGURATION
3.1. Connecting the device to a computer
3.2. Command mode
3.3. AT commands
3.4. Description of the registers
3.4.1 Function registers
3.4.2 Network registers
4. DESCRIPTION OF THE FRAMES
4.1. Uplink frame
4.1.1 Fixed bytes
4.1.2 Frames of information on the product configuration
4.1.3 Frame of information on the network configuration
4.1.4 Keep Alive frame
4.1.5 Data Frame
4.1.6 Summary of the conditions of the transmission of the uplink frames
5. START-UP
5.1. Starting up the product using a magnet
5.2. Replacing the battery
5.3. Closing the casing
6. INSTALLATION AND USE
6.1. Correct positioning of the product transceivers
6.2. Types of fastenings
6.2.1 Tube or mast fastenings
6.2.2 Fixing with screws
6.2.3 DIN-Rail fixing
7. DOCUMENT HISTORY
DEUTSCH VORSCHRIFTEN
41
42
47
47
48
48
49
49
49
49
50
50
50
50
50
51
51
51
52
55
55
56
57
57
58
59
60
60
61
65
65
65
65
67
67
68
69
70
70
70
71
72
72
72
72
73
74
74
75
4 of 79