LoRaWAN TEMP - Guide utilisateur / User guide version V1.2.0
RECOMMANDATIONS REGARDING USE
•
Before using the system, check that the power supply voltage shown in the user manual corresponds to your supply. If it doesn't, please
consult your supplier.
•
Place the device against a fl at, fi rm and stable surface.
•
The device must be installed in a location that is suffi ciently ventilated so that there is no risk of internal heating and it must not be cove-
red with objects such as newspapers, cloths, curtains, etc.
•
The device's aerial must be free and at least 10 cm away from any conducting material.
•
The device must never be exposed to heat sources such as heating equipment.
•
Do not place the device close to objects with naked fl ames such as lit candles, blowtorches, etc.
•
The device must not be exposed to harsh chemical agents or solvents likely to damage the plastic or corrode the metal parts.
DISPOSAL OF WASTE BY USERS IN PRIVATE HOUSEHOLDS WITHIN THE EUROPEAN UNION
EN
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it
is your responsibility to dispose of your waste by taking it to a collection point designated for the recycling of electrical and electronic ap-
pliances. Separate collection and recycling of your waste at the time of disposal will contribute to conserving natural resources and guarantee
recycling that respects the environment and human health. For further information concerning your nearest recycling centre, please contact
your nearest local authority/town hall offi ces, your household waste collection company or the shop where you bought the product
Warning: If the charger is used with any other batteries or products whatsoever, there is a risk of an explosion. After use, the batte-
ries must be disposed of at an appropriate recycling centre. They must not be thrown away to degrade in the environment. When batteries are
replaced, the device must be corectly implemented.
Warning for Switzerland : the annex 4.10 of SR 814.013 Standad must be applied for batteries.
This symbol on the devode or its packaging means the use of a DC voltage.
46 of 79