Publicité
Les langues disponibles
Les langues disponibles
Starting a programme
1. Keep the appliance door ajar.
2. Press the on/off button to activate
the appliance. Make sure that the
appliance is in programme selection
mode.
3. Press repeatedly
shows the number of the programme
you want to start. The display will
show the programme number for
approximately 3 seconds and then
show the programme duration.
The display will show the programme
number for approximately 3 seconds and
then show the programme duration.
4. Set the applicable options.
5. Close the appliance door to start the
programme.
Starting a programme with
delay start
1. Set a programme.
2. Press
again and again until the
display shows the delay time you
want to set (from 1 to 24 hours).
The delay indicator comes on.
3. Close the appliance door to start the
countdown.
While a countdown is running it is
possible to increase the delay time but
not to change the selection of the
programme and options.
When the countdown is completed, the
programme starts.
Opening the door while the
appliance operates
If you open the door while a programme
is running, the appliance stops. When
you close the door, the appliance
continues from the point of interruption.
If the door is opened for
more than 30 seconds
during the drying phase, the
running programme will end.
This will not happen when
programme
AutoOpen is running.
until the display
with
Cancelling the delay start while
the countdown operates
When you cancel the delay start you
have to set the programme and options
again.
1. Open the appliance door.
2. Press the on/off button to deactivate
the appliance.
3. Keep the appliance deactivated for
approximately 30 seconds.
4. Press again the on/off button to
activate the appliance.
5. Press and hold simultaneously
and
until the appliance is in
programme selection mode.
Cancelling the programme
1. Open the appliance door.
2. Press the on/off button to deactivate
the appliance.
3. Keep the appliance deactivated for
approximately 30 seconds.
4. Press again the on/off button to
activate the appliance.
5. Press and hold simultaneously
and
until the appliance is in
programme selection mode.
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
End of programme
When the programme is completed and
you open the door, the appliance is
automatically deactivated.
Close the water tap.
ENGLISH
37
Publicité
