Publicité
Les langues disponibles
Les langues disponibles
30
www.aeg.com
Programme
P2
P3
P4
P5
P6
P7
P8
P9
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
5.2 Information for test
institutes
For all the necessary information for test
performance, send an email to:
6. SETTINGS
6.1 Programme selection
mode and user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
In user mode, the following settings
can be changed:
• The level of the water softener
according to the water hardness.
• The activation or the deactivation of
the acoustic signal for end of
programme.
Water
1)
(l)
7 - 14
14 - 16
12.5 - 14.5
12 - 14
9.5 - 10.5
10
4
9 - 10
Energy
(kWh)
0.6 - 1.4
1.2 - 1.5
1.4 - 1.6
0.7 - 0.9
1.10 - 1.30
0.9
0.1
1.0 - 1.2
info.test@dishwasher-production.com
Write down the product number (PNC)
that is on the rating plate.
• The selection of the colour for
TimeBeam.
• The deactivation of the rinse aid
dispenser when you want to use the
Multitab option without rinse aid.
• The level of rinse aid according to the
required dosage.
These settings will be saved until you
change them again.
Duration
(min)
40 - 150
139 - 149
154 - 164
75 - 85
55 - 65
30
14
219 - 229
Publicité
