Publicité
Allows you to turn on the treadmill if it is switched of or to take a break.
By default your treadmill starts at 2 kmph. To reduce the speed to 1 kmph, use the speed control button.
Allows you to stop exercising at any time.
Allows you to adjust the incline at any time from 0% to 10% in increments of 0.5%.
Allows you to adjust the speed at any time from 1 kmph to 18 kmph in increments of 0.1 kmph (0.1 miles per hour).
Pressing and holding this button lets you scroll through the speeds in increments of 0.5 kmph (0.5 miles per hour).
Lets you select CALORIE programs from 1 to 10.
Lets you select PERFORMANCE programs from 11 to 20.
Allows you to change the main display so that one piece of data is more prominent (choose between: time, distance,
speed, calories, heart rate).
Audio input for MP3 connection
Adjusts the sound volume
Direct access to 10 preset incline levels:
Press the number of your choice to go directly
to the desired level of incline.
Loud speaker
Heart rate sensors
The DOMYOS ENERGY RUN ofers 20 preset programs which vary in speed and incline. The programs are divided into several sections.
Each section corresponds to a speed and incline setting. NB: two successive sections can have the same settings.
During your workout, the lashing section indicates the current section. The height of the section represents the speed.
Total time
Calories burnt
Distance covered
Speed
Heart rate
Proile of the selected program or representation of a 400m running track
(the track gradually takes shape as you go along)
VM indicates the vertical elevation gain (in metres). The counter is triggered when
the treadmill is used with an incline (from 0.5%). The elevation does not change
if the treadmill is used lat (0% incline).
Direct access to seven preset programs:
Press the desired program to start.
Direct access to 10 preset speeds: Press the number
of your choice to go directly to the desired speed.
Loud speaker
Cable to connect your MP3 player
to the treadmill's speakers
Publicité
