HC Cargo 160775 Manuel D'utilisation page 5

OSD Lock
This function provides protection when an unauthorized person tries to access the OSD settings.
JUMP and Source key press simultaneously for over 5 seconds to unlock. Default value is OFF.
Users must turn on LCD in order to run unlock process. All function buttons are still
working during OSD Menu lock up period.
Return
Return to OSD menu selection screen.
CAMERA Menu
This menu set up contains the on Camera and Jump setting.
MIRROR:
Select "ON" to activate the mirror function for different cameras or "OFF" for a normal image.
Default values are following below setting.
CAM A
CAM B
CAM C
CAM R
160775
"OFF"
"OFF"
"OFF"
"ON"
Vedpak 98_Version 6_12.2017
8
Dir Image
The screen image setting of this panel during left / right turn:
TRIPLE: When you are making a right turn or left turn, the screen of
panel will display triple images for left hand side, right
hand side and rear view when you are making a right turn or left turn.
DUAL: With proper wiring, the screen will display dual image for
both rear and right hand side view when making a right turn.
While left turning, the screen will show dual image for both
rear and left hand side view.
SINGLE: Screen shows only single picture on direction turn. The screen
will show only left side view on left turn and only right side view on right turn.
Default value is SINGLE.
Rear Setup
The screen image setting of this panel during reverse gear:
R: Screen will display single image for Cam R only.
R+A: Screen will display dual image for both Cam R and Cam A.
R+B: Screen will display dual image for both Cam R and Cam B.
R/AB Screen will display triple image from Cam R ` Cam A ` Cam B.
CA M R
CA M A CA M B
R+AB Screen will display triple image from Cam R ` Cam A ` Cam B.
CAM A
CAM R
CAM B
Menu
Default value is R.
9
160775
Vedpak 98_Version 6_12.2017