Publicité
Les langues disponibles
Les langues disponibles
8
Before using for the fi rst time
Before using for the fi rst time
Carefully read this Instruction Manual to achieve the best results from your oven.
Due to the manufacturing process there may be residues of grease and other
substances. To eliminate these, proceed as follows:
• Remove all the packaging material, including the protective plastic, if included.
• Select the
provided with this manual.
• To cool the oven open the door to allow ventilation and odours to escape from inside.
• After cooling, clean the oven and the accessories.
During the fi rst use, fumes and odours may occur and the kitchen should therefore be
well ventilated.
Using the oven
In the event of a power failure, all the settings (time of day, programme setting or
programme in operation) will be cancelled. When the power is restored, the numbers in
the display will fl ash, and the clock/timer has to be reset.
Caution!
The electronic clock features Touch-Control technology. To operate, simply touch the
glass control symbols with your fi ngertip.
The touch control sensitivity continuously adapts to changing conditions. Ensure that
the glass front of the control panel is clean and free of any obstacles when turning on
the oven.
If the clock does not respond correctly when you touch the glass, you will need to turn
off the oven for a few seconds and then turn it back on. By doing this, the buttons
adjust automatically and will react once more to fi ngertip control.
Setting the Electronic Clock
When turning your oven on, you will see the clock fl ashing 12:00 . Set the clock by
touching the
You will hear 2 beeps confi rming the time has been set.
If you want to change the time, turn the oven off. Touch the clock button
indicator
fl ashes.
Change the time by touching the
will confi rm the new time has been set.
function at 200 º C for one hour. To do so, consult the feature list
or
symbols on the glass.
buttons. The two beeps you hear after that
until the
Publicité
